This module allows organizations who are subject to the US EPA General Permit (or similar State-issued industrial stormwater permit) to sample stormwater and provide quantitative data to determine pollutant concentrations in runoff. Your organization can then use the results of the stormwater monitoring to help determine the effectiveness of the control measures and overall stormwater management program.
Evaluation of your stormwater management program will include inspections, visual assessments, and monitoring of specified stormwater discharges.
Click here to learn how to get started using the Stormwater Discharge Monitoring Module.
Stormwater Session Details
Allows users to record the details and information about the storm event.
Allows users to select the type and nature of the discharge and rainfall measurements.
Allows users to capture pH testing requirements and the testing details such as the method or equipment used.
Sample Details & Results
Allows users to add sample(s), record their details, and log analysis results. After logging results users can perform their assessment to then measure against set benchmarks.
- Easily collect data about stormwater discharge sample
- Enter your lab results and assess them against predefined benchmarks
- Evaluate the effectiveness of implemented controls measures and create corrective actions to improve performance of controls measures
|Stormwater Discharge Monitoring||Allows users to collect data about stormwater discharge samples, enter lab results and assess them against the pre-defined benchmarks.|
Site Settings can be enabled or disabled to show or hide various components of a Form.
|Stormwater Discharge Monitoring|
Enable the Stormwater Discharge Monitoring Form and Reports.
|Awaiting Submission Period|
Set the number of hours after the Submit step became active before the Submit step is due.
Enable a role to allow Submission of new forms only. User retains access to forms that they have Drafted or Submitted as long as they are listed as the Originator. Does not have access to any forms they did not Submit.
Enable a role to allow Submission, and ability to edit all forms in the Submit step for the Business Entity.
Users in the Shared Submit role will receive Tasks for all forms in the Submit Step for their Business Entity.
Enable Results Workflow Step.
Awaiting Results Period
Set the number of hours after the Results step became active before the Results step is due.
|Default Sampled By|
Enable defaulting the Sampled By field to the logged in user.
|Rainfall Information Required||Make the Rainfall Measurement, Duration of Storm Event, and Hours since previous Storm Event fields always required.|
|pH Testing||Enable pH Testing section.|
Enable Benchmark Source field.
Share with Third Party
Enable Share with Third Party.
= Report is dependent on another Module or Site Setting (SS) being enabled.
|Stormwater Discharge Monitoring Log||Displays a listing of Stormwater Discharge Monitoring forms with their associated details.|
|Stormwater Discharge Monitoring Log with CAPA Details||Displays a listing of Stormwater Discharge Monitoring forms with their associated details, including CAPA information.|
|Stormwater Discharge Monitoring Results Log||Displays Stormwater Discharge Monitoring forms with result details.|
|Stormwater Discharge Monitoring Results with Averages||Displays Stormwater Discharge Monitoring Results by Sample.|